Electronic laboratory table extensions

P2J Technology is a leading manufacturer of modular extensions for Reeco laboratory and workbenches.

The extensions are fully customizable, and their modular design offers high versatility.

They can be purchased as accessories for existing Reeco workbenches.

Each module is housed in a standardized rack that can be mounted onto the upright profiles of Reeco workbenches, similar to shelves, perforated panels, and other accessories.

Easy access to safety components
Short-circuit resistance of power supplies
Easy replacement of individual modules
Possible customization of modules according to customer requirements
Quick implementation

OPTIONAL MODULES

230V/16A 4x Socket Module

Socket module with cover for connecting your own devices, power supplies, generators, counters, oscilloscopes, soldering stations and other devices placed on the shelf or on the Reeco table top.

Ordering code: ZAS230-4
Supply: 1+N+PE ~ 50Hz 230V
Required switchboard: class ROZV400-xx, class ROZV230-xx
Fuse: inside the switchboard + own circuit breaker 16A/B
Max. current by socket: 16A
Degree of protection (IP): IP40

Autotransformator 250V AC/DC

The output of the autotrap is switched on by a rocker switch located between the output terminals. When it is switched on, the red on indicator lights up. The AC output terminals have a voltage corresponding to the position of the knob on the scale. For the DC output, the voltage will be 1.41 times greater.

Ordering code: ATRF250V-2A-ACDC
Supply: 1+N+PE ~ 50Hz 230V
Required switchboard: class ROZV400-xx, class ROZV230-xx
Fuse: Tube fuse 2.5A/T (fast characteristic)
Power input: 460W max.
Output voltage: 0-250VAC, 0-350VDC
Output current: 2A max.
Degree of protection (IP): IP20

Laboratory power supply 40V/10A/400W

The instrument is equipped with three segmented LED displays indicating:

Set / Measured output voltage
Set current limit / Measured output current
Mode indication / Measured power delivered to load

Ordering code: LABZ40V-10A
Supply: 1+N+PE ~ 50Hz 230V
Required switchboard: class ROZV400-xx, class ROZV230-xx
Fuse: 10A
Power input: 550W max.
Output voltage: 0 - 40V, adjustable with steps by 40mV
Output current: 10A max. continuously
Output current limit: 10mA - 10A, adjustable with steps by 10mA
Output connectors: 4x slot for banana plug 4mm
Degree of protection (IP): IP40

Power supply 24V 2A AC/DC

The output of the power supply is switched by a rocker switch located above the output terminals of the power supply. When it is switched on, the LED below it will light up green if everything is OK. If the output current exceeds 2A, the electronic reversible fuse is activated, the power supply output switches off and the LED turns red.

Ordering code: Z24V-2A-ACDC
Supply: 1+N+PE ~ 50Hz 230V
Required switchboard: class ROZV400-xx, class ROZV230-xx
Fuse: 10A
Power input: 110W max.
Output voltage: 24VAC and 24VDC
Output current: 2A for both outputs
Output protection (for both outputs):
•Electronic 2A reversible fuse with LED indication
•2.5A glass tube fuse accessible on the panel
Output connectors: 2x slot for banana plug 4mm for both outputs
Degree of protection (IP): IP40

Socket 400V/32A/5P

The voltage in the socket is switched on by turning the switch on the panel to position 1. The presence of voltage in the socket (on the first phase) is indicated by a red "ON" light. The socket is protected by its own 3-pole 16A/B circuit breaker on the module panel.

Ordering code: ZAS400-1
Supply: 3+N+PE ~ 50Hz 230V/400V
Required switchboard: class ROZV400-xx
Fuse: Circuit breaker 16A/B
Socket: CEE 400V/32A/5 poles
Max. output current: 16A
Degree of protection (IP): IP40

AC output terminals 400V

The voltage at the terminals is switched on by turning the switch on the panel to position 1. The presence of voltage in the socket (on the first phase) is indicated by a red "ON" light. The output is protected by its own 3-pole 16A/B circuit breaker on the module panel.

Note: The output is NOT galvanically isolated from the mains!

Ordering code: Z400V-AC
Supply: 3+N+PE ~ 50Hz 230V/400V
Required switchboard: class ROZV400-xx
Fuse: Circuit breaker 16A/B
Output: 4x safety terminal (3L+N), 1x terminal PE
Max. output current: 16A
Degree of protection (IP): IP20

Panel ampermeters 40A/AC/3x

The measured current is applied to a pair of safety terminals next to the selected meter. The zero position of the indicating needle can, if necessary, be reached with a suitable screwdriver directly on the meter.

Note: The module is intended for indicative AC current measurement only. It is not calibrated.

Soldering station 90W

The control of the device is described in the supplied manual for the QUICK TS1100 microsolder.

Ordering code: MPAJKA-90W
Supply: 1+N+PE ~ 50Hz 230V
Required switchboard: class ROZV400-xx, class ROZV230-xx
Fuse: circuit breaker 10A/B inside the switchboard
Power input: 90W
Degree of protection (IP): IP40

ELECTRONIC LAB SYSTEMS MIPEC

We offer racks in two sizes depending on the size of the table
750mm for tables with a length of 1500mm
900mm for tables with a length of 1200mm or 1800mm
The rack takes up half the length of the table and can accommodate two racks with different modules side by side or one rack and one shelf to accommodate custom devices
For a customized quote based on your requirements, please contact us

Comprehensive solutions

Central control from the teacher's desk.

Adaptability

At the customer's request, we can customize the table color to match the company’s brand colors.

Speed

From the initial design to implementation, it took only six weeks.

Manufacture of electronic modules