Shopping Cart
There are no more items in your cart
Product features
5 litres pack
10*4 - 10*5 Ohm
Electroguard A40 waterborne dissipative acrylic floor coating in EPA. The use of this coating will provide grounding for personnel and prevent electrostatic charging. The paint can be applied with a brush or roller, which just needs to be washed in warm water after use. It is characterized by ease of application and little chemical odor during application. Recommended to apply in two coats. The price shown is for a 5 litre pack, which is sufficient for 50m2 in one coat.
Electroguard A40 can be applied on clean floors, free from greasy dirt. It is not recommended to apply to bare surfaces such as untreated porous concrete, wood, tiles, plasterboard etc. A primer must be applied first before applying to concrete floors.
The curing time of the coating depends on temperature, humidity and ventilation. Dry to the touch in 4 hours, hard in 16 hours, fully cured in 4 days.
Colour grey RAL 7035
We carry out professional installation of ESD floors including substrate preparation. Contact us for a consultation and quotation.
Electroguard A40 can be applied on clean floors, free from greasy dirt. It is not recommended to apply to bare surfaces such as untreated porous concrete, wood, tiles, plasterboard etc. A primer must be applied first before applying to concrete floors.
The curing time of the coating depends on temperature, humidity and ventilation. Dry to the touch in 4 hours, hard in 16 hours, fully cured in 4 days.
Colour grey RAL 7035
We carry out professional installation of ESD floors including substrate preparation. Contact us for a consultation and quotation.